background image

ASSEMBLY  AND  INSTALLATION 

                INSTRUCTIONS

T0594

Features

Important to Know

1. Read all instructions carefully before installation and 

     operation.

2. If you are not familiar with state and local electrical codes, 

    it is recommended that you consult with a qualified 

    electrician.

3. Before installation, shut off power at the main fuse or 

    circuit breaker box. Be aware that simply turning off the 

    wall switch is not sufficient to prevent an electrical shock.

4. This fixture requires a 120V AC, 60 Hz power source. 

5. Do not attempt to take the lantern apart; there are no 

    serviceable parts inside.

6. To avoid sensor damage by lightning or electrical surge, 

    make sure the grounding wire is securely connected.

7. For general safety and to avoid any possible damage to 

    the sensor, be sure the power is switched "off" before 

    replacing the bulb.

Maximum Wattage: 

60W Incandescent Bulb or 20W LED

                                  Dimmable Bulb. 

Work Temperature: -4ºF ~ 104ºF

Hardware Package (included):

W

Clip

Glass Shade

Metal Frame

Fig.1

Mounting Screw (B)

Wire Connector (C)

Bolt Nut (D)

Rubber Pad (E)

Mounting Plate Unit (A)

Wire Connector (C)

House Grounding Wire

Outlet Box

Mounting Screw (B)

Green Grounding Screw

Headless Screw

Mounting Plate Unit (A)

Fixture Wire

Fixture Grounding Wire

Fixture

Bolt Nut-a
Rubber Pad-a

Bolt Nut (D)

Rubber Pad (E)

Glass Shade

Set Screw

Metal Frame

Clip

Backplate

Max.60W Type A Bulb  

(not included)

 

W

 

WARNING: Turn off the main power at circuit breaker before installing fixture.

AVERTISSEMENT: Coupez la source d’alimentation principale au panneau 

central de disjoncteurs avant d’installer le luminaire.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

            2. READ

 AND SAVE THESE INSTRUCTIONS.

 Page 1 / 5

8. Compatible with most LED dimmable bulb.

1. Energy saving fixture.

2. Use dim-to-full brightness where dim-illumination 

    is preferred, such as your front entrance. Use 

    off-to-full brightness where off/on illumination is

    preferred, such as your backyard.

3. When in manual override mode, use wall switch

    to keep the light ON till dawn.

210317

Reviews: