Contents
Page 3 of 46
5.7.1.3
Indication of all cylinder pressure (all) versus crank angle __________________________ 28
5.7.2
Screen page “Pcomp Balance” ____________________________________________________ 29
5.7.3
Screen page “IMEP” ____________________________________________________________ 29
5.7.4
Screen page “IMEP balance” _____________________________________________________ 30
5.7.5
Screen page “Engine data” _______________________________________________________ 30
5.7.6
Screen page “Engine report” _____________________________________________________ 31
5.7.7
Screen page “Trending” _________________________________________________________ 31
6
Accuracy check _______________________________________________________ 33
6.1
Connection of CPM 500 to pressure calibrator _________________________________ 34
6.2
Generate pressure at pressure calibrator _____________________________________ 35
6.3
Example of displayed CPM 500 values during pressure check ____________________ 36
6.4
Disconnect CPM 500 from pressure calibrator _________________________________ 36
7
Cleaning ____________________________________________________________ 37
7.1
Periodically cleaning ______________________________________________________ 37
7.2
Cleaning in case of hard deposit _____________________________________________ 37
7.3
Cleaning procedure of adaptor ______________________________________________ 38
7.4
Cleaning procedure of cylinder pressure sensor _______________________________ 38
8
Basic check for fault finding ____________________________________________ 39
9
Nomenclature ________________________________________________________ 40
10
Technical data ________________________________________________________ 41
11
Thomson Adapter _____________________________________________________ 42
Please note:
(*) IPOWER- and IMEP calculation functionality
is only available with Dongle 620-66-002-00
