Heinrichs Messtechnik GmbH
Page 4 of 31
Ex-Supplement operating manual
UMC4 with TM/TMU/TME/TMR/TM-SH
Introduction
I
Shipping and storage; product inspection
Shipping and Storage
The device is to be safeguarded against moisture, dirt, impact and damage.
Product inspection
Upon receipt of the product, the consignment should be checked for
completeness. The data of the device have
to be compared with the packing slip and the order documents
Notify us of any shipping damage immediately upon receipt of the product. Any damage claim received at a
later time will not be honored.
II
Warranty
Your flow meter was manufactured in accordance with the highest quality standards and was thoroughly
tested prior to shipment. However, in the event any problem arises with your device, we will be happy to
resolve the problem for you as quickly as possible under the terms of the warranty which can be found in the
terms and conditions of delivery. Your warranty will only be honored if the device was installed and operated in
accordance with the instructions for your device. Any mounting, commissioning and/or maintenance work is to
be carried out by qualified and authorized technicians only.
III
Validity of this operating manual
Note!
The present instructions apply to explosion-proof Coriolis flow meters
TM/TME/TMU/TMR and TM-SH series which are operated in conjunction with the UMC4
transmitter
as of year of construction October 2018 or later.
These instructions are supplementary operating manual for non-explosion proof Coriolis flow
meters. If you do not have a copy of the latter instructions, please request one from Heinrichs Messtechnik
GmbH or download the instructions from our website.
The instructions herein pertain primarily to explosion proof Coriolis flow meters. The technical data in the
mounting and operating instructions for non-explosion proof Coriolis flow meters still apply insofar as the
present instructions do not replace them or exclude their application.
IV
Repairs and hazardous materials
It is important that you do the following before shipping your flow meter to Heinrichs Messtechnik GmbH for
repair:
•
Enclose a description of the problem with your device. Describe in as much detail as possible the
application and the physical and chemical properties of the fluid.
•
Remove any residues from the device and be sure to clean the seal grooves and recesses thoroughly. This
is particularly important if the fluid is corrosive, toxic, carcinogenic, radioactive or otherwise hazardous.
The operator is liable for any substance removal or personal damage costs arising from inadequate cleaning of
a device that is sent for repair.
