www.heinner.com 9Kg, 220-240V~50Hz
8
Connection to water outlet (with optional drain hose)
In products with a heat pump unit, water accumulates in the water tank during the drying
process. You must empty the accumulated water after each drying process. Instead of
periodically emptying the water tank, you can also use the water drain hose provided with
the product to directly drain the water outside.
Connecting the Water Discharge
Hose
1. Pull and take out the end of the hose at the back of the dryer. Do not use any tools to
take out the hose.
2. Fit one end of the water discharge hose, which is provided with the product, to the slot
from which you have removed the hose.
3. Fix the other end of the water discharge hose directly to the water outlet or sink.
ATTENTION
: The hose must be connected in a manner that it cannot be displaced. If
the hose comes out during water discharge, there might be flooding in your house.
IMPORTANT:
The water discharge house must be installed at a height of 80cm
maximum.
IMPORTANT
: The water discharge hose must not be sent between the outlet and the
product, folded or stepped over.
Adjusting the feet
1.
For the dryer to work with less noise and vibration, it must be stable and balanced on
its feet. Adjust the feed to ensure that the product is balanced.
2.
Rotate the feet to the right and to the left until the dryer is even and stable.
IMPORTANT
: Never remove the adjustable feet.
