www.heinner.com 9Kg, 220-240V~50Hz
2. Emptying the water tank
3. Cleaning the heat exchanger
IMPORTANT
: Clean the heat exchanger
when you see the warning “Heat Exchanger
cleaning”
.
IMPORTANT
:
EVEN IF THE “HEAT
EXCHANGER CLEANING WARNING
LED”
IS NOT ON:
CLEAN THE HEAT EXCHANGER AFTER EVERY 30 DRYING PROCESSES OR ONCE A MONTH.
1. Pull the drawer cover and carefully take out
the tank.
2. Empty the water in the tank.
3. If there is lint accumulated on the discharge
cap in the tank, clean it with water.
4. Refit the water tank.
IMPORTANT
: Never remove the water
tank when the programme is running. The
water condensed in the water tank is not
suitable for human consumption.
IMPORTANT
: Do not forget to empty the
water tank after each use.
If the drying process is completed, open the loading door and
wait for it to cool down.
1. Open the kick plate cover as shown.
2. Unlock the exchanger cover by turning in the direction
shown with arrows.
3. Take out the exchanger cover as shown.
4. Clean the front surface of the exchanger as shown.
5. Fit the exchanger cover as shown.
6. Lock the exchanger cover by turning in the direction shown
with arrows.
7. Close the kick plate cover as shown.
WARNING: DO NOT CLEAN WITH BARE HANDS SINCE THE
EXCHANGER FINS ARE SHARP. THEY MAY HURT YOUR HANDS.
