www.heinner.com 9Kg, 220-240V~50Hz
3
•
Before contacting the local Authorised Service Provider for the
installation of the dryer, check the information in the user manual to
make sure that the electrical installation and water outlet is suitable. If
they are not, call a qualified electrician and a plumber to have the
necessary adjustments made.
• It is the customer’s responsibility to prepare the dryer’s installation
place, as well as the electricity and waste water installation. Before
installation, check the dryer for damage. If damaged, do not have it
installed. Damaged products may endanger your health.
•
Install the dryer on a stable and flat surface.
•
Run the dryer in a dust-free environment where the air ventilation is
good.
•
The clearance between the dryer and the floor should not be reduced
with objects such as carpets, wood or tape.
Do not block the ventilation grills found on the plinth of the tumble dryer.
•
The appliance must not be installed behind a lockable door, a sliding
door or a door with a hinge on the opposite side of the tumble dryer, in
such a way that blocks the full opening of the tumble dryer door.
•
Once the dryer has been installed, the connections must remain stable.
When installing the dryer, make sure that the rear surface is not leaning
on anything (e.g. tap, socket).
•
The operating temperature of the dryer is +5°C to +35°C. If operated
out of this temperature range, the performance of the dryer will be
affected negatively and the product will be damaged.
•
Be careful when carrying the product since it is heavy. Always wear
safety gloves.
•
Always install the product should be placed against a wall.
•
The rear surface of the product should be placed against the wall.
•
When the product is placed on a stable surface, use a water level to
check if it is fully stable. If not, adjust the feet until it becomes steady.
Repeat this process every time you relocate the product.
•
Do not place the dryer onto the power cable.
SAFETY INSTRUCTIONS
This section contains safety instructions that will help protect you from
risk of personal injury or property damage. Failure to follow these
instructions will void any warranty.
1.1. Electrical Safety
•
The appliance must not be supplied through an external switching
device, such as a timer, or connected to a circuit that is regularly switched
on and off by a utility.
•
Do not touch the power plug with wet hands. Always pull the plug to
unplug the product, otherwise, there will be risk of an electric shock.
•
Connect the dryer to a grounded socket with fuse protection. Have the
earth connection installed by a qualified electrician. Our company cannot
be held responsible for damages/losses resulting from using the dryer
without an earth connection as required by local regulations.
•
The voltage and the allowable fuse protection are indicated on the type
plate.(For the type plate, please see 3. Overview)
•
Voltage and frequency values indicated on the type plate must be equal
to the mains voltage and frequency value in your house.
•
Unplug the dryer when it is not used for an extended period, and
before installation, maintenance, cleaning and repair, otherwise, the
dryer may get damaged.
