Heinner HEM-250, User Manual, Page: 22 / 56

www.heinner.com 1050W, 50-60Hz, 220-240V
21
7. When the ready indicator (green) is illuminated, you should press down the pump
control button to the lower position which is the “ ” position again, there will be
hot water flowing out.
8. After water has flown for 20S, press the pump control knob to “
STO P
” position. The
pre-heating is finished.

Make an espresso:
1. Remove the funnel by turning it clockwise.
2. Add ground coffee to steel mesh with measuring spoon, a spoon ground coffee
power can make about a cup of top-grade coffee, then press the ground coffee
powder tightly with the tamper.
3. Then insert the funnel into the appliance from the “Insert” position, and you can fix
them into coffee maker firmly by turning it anticlockwise until it is at the “Lock”
position.(See fig. 1).
4. Pour out the hot water in the cup. Then place the hot cup (yourself cup) on
removable cup shelf.
5. Make sure the steam control knob is at the minimum position, and the coffee/steam
button is on the higher position which is the position.
6. At the time, the ready indicator (green) is illuminated, once the green lamp
illuminate, you should press down the pump control button to the lower position
which is the “ ” position, wait a moment, there will be coffee flowing out
7. You should press and release the pump control button to the higher position which is
the “
STO P
” position manually when desired coffee is obtained or the colour of coffee
changes weak obviously.
8. After finishing making coffee, press the ON/OFF button, and the power indicator and
ready indicator go out and the coffee maker stops working, your coffee is ready now
WARNING: do not leave the coffee maker unattended during making coffee, as you need
operate manually sometimes.