8
VI.
BEFORE USING THE APPLIANCE
Preparing your Dishwasher for first use
•
Check whether the electricity and supply water specifications match the values
indicated in the installation instructions for the machine.
•
Remove all packaging materials inside the machine.
•
Set the water softener level.
•
Fill the rinse aid compartment.
Fill the salt
To fill with softener salt, open the salt compartment cap by turning it counter clockwise. (1)
(2) At first use, fill the compartment with 1 kg salt and water (3) until it is almost
overflowing. Using a funnel (4) (
the funel is not provided with the product
) will make filling
easier. Replace the cap and close it. After every 20th-30th wash, add salt into your machine
until it fills up (approx. 1 kg).
Fill the salt compartment with water the first time you fill the salt compartment only.
Use softener salt specifically produced for use in dishwashers.
When you start your dishwasher, the salt compartment is filled with water, therefore put the
softener salt in prior to starting your machine.
If the softener salt has overflowed and you do not start the machine immediately, run a
short washing program to protect your machine against corrosion.
Test Strip
(it’s not
provided with product)
NOTE:
Level is set 3 as default. If the water is well water or has a hardness level above 90 dF,
we recommend that you use filter and refinement devices.
