15
Press the Power On/Off button (1), the End Of Programme Indicator (6) will illuminate.
Select the programme most suitable for your dishes using the Programme Selection button (3).
The selected program number can be seen in the LED display (2) and the End Of Programme
Indicator will switch off.
The programme will start automatically when the door is closed.
NOTE:
If you decide not to start the selected programme, please see the "Changing a
Programme" and "Cancelling a Programme" sections.
NOTE:
When there is not enough dishwasher salt, the Salt Lack Warning Indicator (6) will
illuminate to indicate the salt chamber needs filling.
NOTE:
When there is not enough rinse aid, the Rinse Aid Lack Warning Indicator
(6) will
illuminate indicating the sal chamber needs filling.
Delaying a Programme
Press the Delay button (4) to delay the start time of the selected programme by 3, 6 or 9 hours.
Pressing the button once delays the start time by 3 hours, pressing twice by 6 hours, and pressing
a third time by 9 hours. The programme can be selected first and the delay duration after, or vice
versa. Press the Delay button to change or cancel the delayed start. The remaning delay time will
show on the display and the corresponding Delay Indicator will be illuminated (3h, 6h, or 9h).
Changing a Programme
Follow the steps below to change a programme while in operation.
NOTE:
Open the door slightly at first to stop a programme before it is complete in order to avoid
water spillage.
IX.
CONTROL PANEL
