19
FAULT
POSSIBLE CAUSE
TROUBLESHOOTING
The programme does not start.
Your Dishwasher is not plugged in.
Plug your Dishwasher in.
Your Dishwasher is not switched on.
Switch your Dishwasher on by pressing the On/Off button.
Fuse blown.
Check your indoor fuses.
Water inlet tap is closed.
Turn on the water inlet tap.
Your Dishwasher door is open.
Close the Dishwasher door.
Water inlet hose and machine filters are
clogged.
Check the water inlet hose and machine filters and make sure
they are not clogged.
Water remains inside the machine.
Water drain hose is clogged or twisted.
Check the drain hose, then either clean or untwist it.
The filters are clogged.
Clean the filters.
The programme is not finished yet.
Wait until the programme is finished.
Machine stops during washing.
Power failure.
Check mains power.
Water inlet failure.
Check water tap.
Shaking and hitting noises are heard
during a wash operation.
The spray arm is hitting the dishes in the
lower basket.
Move or remove items blocking the spray arm.
Partial food wastes remain on the
dishes.
Dishes placed incorrectly, sprayed water
not reaching affected dishes.
Do not overload baskets.
Dishes leaning each another.
Place dishes as instructed in the section on loading your
dishwasher.
Not enough detergent used.
Use the correct amount of detergent, as instructed in the
programme table.
Wrong wash programme selected.
Use the information in the programme table to select the most
appropriate programme.
Spray arms clogged with food waste.
Clean the holes in the spray arms with thin objects.
Filters or water drain pump clogged or filter
misplaced.
Check the drain hose and filters are correctly fitted.
VIII.
TROUBLESHOOTING
