22
Spray arms
Check whether or not the holes for the upper and lower spray arms are clogged. If there is any
clogging, remove the spray arms and clean them under water.
You can remove the lower spray arm by pulling it upwards, while the upper spray arm nut can be
removed by turning the nut to the left.
Be sure that the nut is perfectly tightened when refitting the upper spray arm.
Hose filter
Water is prevented by the inlet hose filter so as to avoid any damage to your machine because
of any contamination (sand, clay, rust etc.) that might be occasionally carried in through the
mains water supply or the indoor plumbing, and to forestall such complaints as yellowing and
formation of deposits after washing. Check the filter and the hose from time to time and clean
them if necessary. To clean the filter, first turn off your tap and then remove the hose. After
removing the filter from the hose, clean it under the tap. Insert the cleaned filter back into its
place inside the hose. Refit the hose.
Summary of Contents for HDW-BI4582TA++
Page 42: ...www heinner com 41...
