19
Operating your machine
Switching on the machine
1.
Touch the power On/Off key (1).
When the machine is powered on, two dashes appear in the program display.
2.
When selecting a program with the program touch button (2), the program selected
(P1,P2,etc ) appears on the program display, from (P1 to P8) and the duration of the
program are displayed alternately during 3 sec. for the program and then 1 sec. for the
duration time.
3.
If desired, you can choose additional functions. (4-7)
4.
Close door.The program starts automatically.
Note: If you decide not to start the machine after selecting the program, press the on/off touch
button (1). The machine will be ready for the new program selection when you press on/off
touch button (1) again. Select the new program by pressing the program touch button (2).
Program follow-up
1.
When the door is opened after the selected washing program is completed, the buzzer
activation will end and a ‘0’ character is showed on display (3).
2.
If the door is opened during washing cycle, the remaining time of the selected program
is shown on the display (3).
3.
The machine makes a buzzer sound 5 times when the program is completed.
Changing a program
To change the program while a wash program is going.
1.
Open the door and select a new program by pressing the program touch button (2).
2.
After closing the door, the newly selected program start from the point where the
original program reached, but with the new parameters (temperature, cycles) of the
new program.
Cancelling and resetting a program
To cancel a program currently in progress or in a standby position.
1.
Open the door of the machine. The last selected program will appear on the display
(3).
2.
Press and hold the program touch button (2) for 3 seconds. The display (3) will count
from ‘’3 to 1’’ and then show ‘’0:01” to indicate that cancelling is ready.
3.
After the door is closed, the discharge process starts. The machine will discharge the
water in it for about 30 seconds. When the program is cancelled, the machine will
make a buzzer sound 5 times.
Note: When the door of the machine is opened in order to stop the washing program before it
has completed, first carefully open the door slightly in order to avoid water spillage.
Switching the machine off
After the program has finished, switch the machine off by using the power On/Off touch button
(1).
Note: To improve the drying performance, after the buzzer sound indicating the end of the
wash program stops, leave the door of the machine open in order to fasten the drying.
Note: If the machine door is opened during washing or the power is cut off, the machine will
restart the program
when the door is closed or the power is restored.
Summary of Contents for HDW-BI4582TA++
Page 42: ...www heinner com 41...
