Heinner HCH-490-BK, Instruction Manual

Page: 5 / 58

www.heinner.com 2x60W, 50Hz, 220-240V
4
IV. INSTALATION
Mounting of the V-Flap
If the cooker hood does not have an assembled V-flap 1, you should mount the half-parts
to its body. The images only show an example of how to mount the V-flap, because the
outlet may vary according to different models and configurations.
To mount the V-flap 1 you should:
•
Mount two half-parts 2 into the body 6.
•
The pin 3 should be top oriented.
•
The axis 4 should be inserted into the holes 5 on the body.
•
Repeat all the operations for the 2nd half-part.
A. Wall mounting
If you have an outlet to the outside, your cooker hood can be connected as below picture
by means of an extraction duct (enamel, aluminum, flexible pipe or non-flammable
material with an interior diameter of 120 mm).
1. Before installation, turn the unit off and unplug it from the outlet.
2. The cooker hoods should be placed at a distance of 65-75cm from the cooking surface
for best effect.