Heinner HCH-490-BK, Instruction Manual

Page: 10 / 58

www.heinner.com 2x60W, 50Hz, 220-240V
9
VI. TROUBLESHOOTING
Fault Possible Cause Solution
Light on, but motor
does not work
Fan switch turned off Select a fan switch position.
Fan switch failed Contact service center.
Motor failed Contact service center.
Light does not work,
motor does not work
House fuses blown Reset/Replace fuses.
Mains power cable is loose or disconnected
Refit mains power cable to
power outlet.
Switch power outlet on.
Oil leakage
One way valve and the outlet are not
tightly sealed
Take down the one way
valve and seal with sealant.
Leakage from the connection of chimney
and cover
Take chimney down and
seal.
Lights not working Broken or faulty bulbs
Replace blubs as per this
instruction.
Insufficient suction
The distance between the cooker hood and
the gas top is too far
Refit the cooker hood to
the correct distance.
The Cooker hood
inclines
The fixing screw is not tight enough
Tighten the hanging screw
and make it horizontal.
Note: Any electrical repairs to this appliance must conform to your local, state and
federal laws. Please contact the service centre if in any doubt before undertaking any of
the above. Always disconnect the unit from the power source when opening the unit.