9.5
Setting up or adjusting the grinder
to grind cutters
With the grinder turned off, hang the
pendulum from the pendulum hook.
Fit the cutter to the cutter pins and
lightly slide the cutter over the disc
a couple of times using the grinding
action
(see fig
‘H’).
If the pendulum hook is too far in the
cutter will be rubbing on the tip
(see
fig ‘I’),
if the pendulum hook is too
far
out, the cutter will rub on the heel
(see fig ‘J’)
. Adjust the pendulum
hook until the cutter rubs on both the
tip and heel
(see fig ‘K’).
13
Summary of Contents for Acutecc Euro Grinder
Page 9: ...8 ...
Page 19: ...14 Component illustration 18 ...
