HEINE EN200 BP, Instructions For Use Manual

Page: 49 / 212

MED 113275 2018-02-26
49/212
2.2 SINGLE MEASUREMENTS
PERFORMING THE SINGLE MEASUREMENTS
•
Start your EN200 BP.
•
The start screen appears in the display
accompanied by an acoustic signal.
•
Select the ”single measurement“ mode.
•
Position the blood pressure measurement cuff
on the left arm.
•
A note on the screen asks you to double-check
the position and size of the blood pressure cuff.
•
Confirm this screen and perform the measurement
by pressing the ”Start“-button .
•
The EN200 BP automatically slowly inflates the cuff
to measure the blood pressure. The pressure display
changes constantly during inflation.
•
The device inflates the cuff until an adequate pressure
for the measurement is reached. The device then slowly
releases the air from the cuff and performs the
measurement. The blinking -symbol represents
the pulse.
•
You can terminate the measurement at any time by
pressing the -button.