3. Installation
3) Signal cable between indoor control unit and monoblock unit
10M communication cable is packed in accessories bag.
C
B
A
corresponding
with each other
A B
A
B
67
A. Insert one end of this cable through the cable gland on bottom of the indoor control unit, and connect
this cable to A and B on terminal block.
B. Fasten the cable gland to ensure the cable won't get loosen.
Take off the top cover , and connect the other end of communication cable to correspondent
terminal block through cable gland. Fix the cable with cable gland after cable is well connected. A and B
on monoblock unit should be connected with A and B on indoor control unit, otherwise unit will show
communication failure.
C
.