Heatmiser UH6, Installation Manual, Page: 10 / 20

Wiring Centre
Inserting Thermostat Cables
Once the front module has been locked in
position, the next step is to bend each cable
around and insert into the cable clamp.
As shown here.
For stranded cables, it may be necessary
to twist the cable strands & open the
cable clamp before inserting the cable.
To open the cable clamp, insert a small
screwdriver into the slot underneath the
cable entry, and push on the spring loaded
button, the cable entry will open wider to allow
you to insert the cable.
You may have a preference of inserting the cables from right to left or left to right.
Once you've finished inserting your thermostat cables, the UH6 will appear similar to as shown below...
9