01/04
31818 Rev J
23
ODYSSEY SERIES FIREPLACE WITH GAS LOG SET
Note:
This appliance must be electrically wired and
grounded in accordance with local codes or, in the absence
of local codes, with
National Electric Code ANSI/NFPA 70-
latest edition
or the
Canadian Electric Code, CSA C22.1
.
6. Standing Pilot Ignition
a. Appliance Requirements.
A wiring diagram is shown
in Figure 25.
b. Optional Accessories Requirements.
Wiring for
optional accessories should be done now to avoid
reconstruction. To install junction box, please refer
to the installation instructions supplied with the
junction box kit.
WARNING!
The standing pilot appliance does NOT require a 110V
AC supply for operation. Connecting the appliance/wall
switch to a 110V AC supply will cause the appliance to
malfunction and destroy the valve and thermopile.
Figure 25
Standing Pilot Ignition Wiring Diagram
