Heatilator • NDI30-C, NDI30-SP, NDI35-C, NDI35-SP, NDI30-SPFK, NDI35-SPFK • 2226-901 Rev. K • 11/12
2
Listing Label Information/Location
Model Name: ___________________________________________ Date purchased/installed: __________________
Serial Number: __________________________________________ Location on fi replace: _____________________
Dealership purchased from: _______________________________ Dealer Phone: __________________________
Notes: _______________________________________________________________________________________
_____________________________________________________________________________________________
A. Congratulations
Congratulations on selecting a Heatilator gas fi replace, an
elegant and clean alternative to wood burning fi replaces.
The Heatilator gas fi replace you have selected is designed
to provide the utmost in safety, reliability, and effi ciency.
As the owner of a new fi replace, you’ll want to read and
carefully follow all of the instructions contained in this
Owner’s Manual
. Pay special attention to all cautions and
warnings.
This
Owner’s Manual
should be retained for future
reference. We suggest that you keep it with your other
important documents and product manuals.
The information contained in this
Owner’s Manual
, unless
noted otherwise, applies to all models and gas control
systems.
Your new Heatilator gas fi replace will give you years of
durable use and trouble-free enjoyment. Welcome to the
Heatilator family of fi replace products!
We recommend that you record the following pertinent
information about your fi replace.
Gas and Electric
Information
Serial Number
Type of Gas
The model information regarding your specifi c fi replace can be found on
the rating plate usually located in the control area of the fi replace.
Homeowner Reference Information
Model Number
Heatilator, a brand of Hearth & Home Technologies, Inc.
7571 215th Street West, Lakeville, MN 55044
Not for use with solid fuel.
(
Ne doit pas entre utilise avec un combustible solide).
This appliance must be installed in accordance with local codes, if any; if not, follow ANSI Z223.1
in the USA or CAN/CGA B149 installation codes.
(Installer l’appareil selon les codes ou reglements
locaux ou, en l’absence de tels reglements, selon les codes d’installation CAN/CGA-B149.)
Type of Gas
(Sorte De Gaz)
:
NATURAL GAS
MADE IN US A
Minimum Permissible Gas Supply for Purpos es of Input Adjustment .
Approved Minimum
(De Gaz)
Acceptabl e 0.
0 in w. c.
(Po. Col. d’eau)
Maximum Pressure
(Pression)
0. 0 in w. c.
(Po. Col. d’eau)
Maximum Manifold Pressure
(Pression)
0. 0 in w. c.
(Po. Col. d’eau)
Minimum Manifold Pressure
(Pression)
0. 0 in w. c.
(Po. Col. d’eau)
Mode l:
(Modele):
Serial
(Serie):
ANSI Z21XX-XXXX · CSA 2.XX-MXX · UL307B
XXXXXXXX
IN CANADA
AL TI TUDE : 0-0000
FT
. 0000-0000FT
.
MAX. INPU T BTUH: 00,000
00,000
MIN. INPU T BTUH: 00,000
00,000
ORIFICE SIZE: #XXXXX
#XXXXX
X XXXXXXX
To tal Electrical Requirements: 000V ac, 00Hz., less than 00 Ampere s
Read this manual before installing or operating this appliance.
Please retain this owner’s manual for future reference.
