Heatilator • LEGACY42-IFT Installation Manual • 4095-901 Rev. A
• 12/17
40
Figure 11.6
•
Install Left & Right Side Hearth Refractory Brackets,
as shown, and secure with (3) screws each. See Fig
-
ure 11.7.
•
Reinstalling the smoke shield: loosen screws secur
-
ing the smoke shield side extensions, (2) screws
per side, and adjust extensions inward on the
smoke shield. Reinstall smoke shield to appliance,
(5) screws. Adjust smoke shield side extensions to
-
wards the outside of the appliance until they are tight
against the left and right side refractories. Tighten (2)
screws per side to lock side extensions in place. See
Figure 11.6.
Hearth Refractory Bracket
Figure 11.7
•
Set Left & Right Side Hearth Refractories onto side
brackets, as shown. Position side hearth refractories
so that the front edge lines up with front of burner.
See Figure 11.8.
Figure 11.8
•
Set Left, Right & Middle Front Hearth Refractories
between the front edge of the burner and the front
edge of the Legacy appliance. Install Grate Assembly
as shown. See Figure 11.9.
Figure 11.9
Side Hearth Refractories
Front Hearth Refractory
Grate Assembly
(2) Screws
Smoke Shield
Side Extension