15
Heatilator • LEGACY42-IFT Installation Manual • 4095-901 Rev. A
• 12/17
O
N
P
R
Q
CAUTION! Risk of Burns!
Termination caps are HOT, consider proximity to doors, traffic areas or where
people may pass or gather (sidewalk, deck, patio, etc.).
•
LOCAL CODES OR REGULATIONS MAY REQUIRE DIFFERENT CLEARANCES.
• Vent system termination is
NOT
permitted in screened porches.
• Vent system termination is permitted in porch areas with two or more sides open.
• Hearth & Home Technologies assumes no responsibility for the improper performance of the appliance when
the venting system does not meet these requirements.
Chimney Diagram (cont.)
Clearance = 36 in
Measure horizontal
clearances from this
surface
Measure vertical clearances
from this surface
Alcove Requirements
Figure 4.2 Minimum Clearances for Termination