Heatilator • GNTC50 • 4002-095 Rev H • 06/07
41
1. Lift and pull out
the upper grille.
2. Open the control
access panel.
3. Rotate the bottom of
the screen away from
the appliance and
lower out of the top
retainers. Set the
screen aside.
4. Pull and release four
Quick Access
Latches™.
5. Pull the top of the
glass away from the
appliance.
6. Set the glass on a
nonabrasive surface.
Clean using a
nonabrasive, mild
cleaning solution (i.e.
Brasso).
7. To replace, place the
glass on the bottom
retainers. Glass
must be firmly
seated on the bottom
glass retainers.
8. Reattach the four
Quick Access
Latches.
9. Place the screen into
the top screen
retainers, lift and
rotate towards the
appliance. Place on
the bottom retainers.
10. Close the control
access panel and
replace the upper
grille.
Figure 12.6 Removing/Replacing Glass Assembly
Handle glass doors with care.
• Inspect the gasket to ensure it is undamaged.
• Inspect the glass for cracks, chips or scratches.
• Do NOT strike, slam or scratch glass.
• Do NOT operate appliance with glass door removed, cracked, broken or scratched.
• Replace glass door assembly as a complete assembly.
WARNING
H. Glass Assembly
The glass assembly will be removed and replaced as shown
in Figure 12.6.
G. Log Assembly
Inspect the log set. The log set is shipped in one piece and
should look similar to that in Figure 12.5.
Figure 12.5 Log Set
