8
Heatilator • Birmingham BIR50-B Installation Manual • 4059-701 • Rev G • 06/29/15
C. Tools and Supplies Needed
Before beginning the installation be sure the following
tools and building supplies are available:
Reciprocating saw
Framing material
Pliers
Non-combustible sealant
Hammer
Gloves
Phillips screwdriver
Framing square
Flat blade screwdriver
Electric drill and bits
Plumb line
Safety glasses
Level
Tape measure
1/2-3/4 in. length, #6 or #8 self-drilling screws
Misc. screws and nails
D. Inspect Fireplace and Components
WARNING! Risk of Fire and/or Explosion!
Damaged
parts could impair safe operation.
DO NOT
install dam
-
aged, incomplete or substitute components. Keep fire-
place dry.
• Remove fireplace and components from packaging and
inspect for damage.
• Vent system components and doors are shipped in
separate packages.
• Report to your dealer any parts damaged in shipment.
• Read all the instructions before starting the
installation. Follow these instructions carefully
during the installation to ensure maximum safety
and benefit.
E. Fireplace System Requirements
The Heatilator fireplace system requirements consist of
the following:
• Fireplace
- Molded brick panels (hearth panel Included with
fireplace, side and back panels sold separately)
- Firescreen (included with fireplace)
- Hearth Extension (sold separately)
- Grate (included with fireplace)
• Outside Air System
- Air Inlet Hood (included with fireplace)
- Flex (required, sold separately)
• Chimney System
- Attic Insulation Shield (sold separately)
- Chimney termination cap (sold separately)
• Non-combustible finish material
