HeathCo Secur360 SL-9600-90, Quick Start Manual

Page: 21 / 92

21
Cannot Connect Device To Network
QR Code Will Not Scan
If your QR code will not scan, you can easily connect
to your network using AP mode.
1. Launch your Secur360 app.
2. Select the “+” button in the upper right corner.
3. Select doorbell icon.
4. In the upper right corner, select “QR Code” to
access the drop down menu.
5. Select “AP Mode”.
6. Select “Next” until you get to step 5, select confirm
and then select “next”.
7. Connect your smartphone to your 2.4GHz
network. The 2.4GHz network will likely have a 2,
2.4 or 2G in the name”.
NOTE: Please make sure you connect to ONLY your
2.4GHz network. Like most connected products, your
Secur360 video doorbell will NOT work on a 5GHz
network.
8. You are now prompted to select the hotspot
network of your Secur360 video doorbell. This
name will be “SL-xxxxxx”.
9. Your Secur360 video doorbell will now
automatically connect to your network and your
LED ring will be solid blue.