© 2009 HeathCo LLC
598-1345-01
Features
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Photocell keeps the lighting off during daylight
hours.
Requirements
• The light control requires a properly installed and
working light fixture, operating on 120 volts AC.
• If you want to use Manual Mode, the fixture must be
wired through a switch.
Instant Motion Sensor
Light Control
Model 5215
Parts
Package includes:
• Motion Sensor
• 2 Lamp Adapters
• Two mounting screws
Existing Light Fixture
Sensor
Module
Sensor
Cord
Typical Installation
The lamp module should only be used with Listed lamp
fixtures. Never use a light bulb with a higher wattage
rating than the rating of your fixture.
Lamp Adapter
Floodlamp
(not included)
OPERATION
* resets to Auto Mode at dawn.
TEST
AUTO
MANUAL MODE
ON-TIME
ON-TIME
10 5 1
TEST
10 5 1 TEST
... back on.
1 Second
OFF
then
...
Manual mode only works at night
because daylight returns the sensor
to AUTO.
Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.
Note: When first turned on wait about 1
1
/
2
minutes for
the circuitry to calibrate.
Put the ON-TIME switch in the 1, 5,
or 10 minute position.
Put the ON-TIME switch on the bottom
of the sensor in the TEST position.
Mode:
On-Time:
Works:
Day
Night
Test
5 Seconds
x
x
Normal
1, 5, 10 min.
x
Manual
Until Dawn*
x
