background image

-4-

598-1155-01

TROUBLESHOOTING GUIDE

SYMPTOM

Lights will not 
come on.

Lights come on 
in daylight.

Lights come on 
for no apparent 
reason.

POSSIBLE CAUSE

1.  Light switch is turned off.
2.  Light is loose or burned out.
3.  Fuse is blown or circuit breaker is turned 

off.

4.  Daylight turn-off is in effect 

(recheck 

after dark)

.

5.  Incorrect circuit wiring, if this is a new 

installation.

6.  Re-aim the sensor to cover desired area.

1.  Light control may be installed in a rela-

tively dark location.

2.  Light control is in Test. 

(Set control switch 

to an ON-TIME position)

.

1.  Light control may be sensing small 

animals or automobile traffi c 

(re-aim 

sensor)

.

2.  Range is set too high. 

(Reduce Range)

.

SYMPTOM

Lights stay on 
continuously.

Lights fl ash  on 
and off.

POSSIBLE CAUSE

1.  A lamp is positioned too close to the sensor 

or pointed at nearby objects that cause heat 
to trigger the sensor. 

(Reposition the lamp 

away from the sensor or nearby objects)

.

2.  Light control is pointed toward a heat 

source like an air vent, dryer vent, or 
brightly-painted heat-refl ective surface. 

(Reposition sensor)

.

3.  Light control is in Manual Mode. 

(Switch 

to Auto.)

1.  Heat or light from the lamps may be turning 

the light control on and off. 

(Reposition the 

lamps away from the sensor)

.

2.  Heat being refl ected from other objects may be 

affecting the sensor. 

(Reposition sensor)

.

3.  Light control is in the Test mode and 

warming up. 

(Flashing is normal under 

these conditions)

.

4.  Light control is detecting a light source. 

(Reposition Light control or lamp).

TECHNICAL SERVICE

Please call 1-800-858-8501 (English speaking only) for assistance

before returning product to store.

If you experience a problem, follow this guide. You may also want to visit our Web site at: 

www.hzsupport.com.

 

If the problem persists, call* for assistance at 

1-800-858-8501

 (English speaking only)

,

 7:30 AM to 4:30 PM CST 

(M-F). You may also write* to:
HeathCo LLC, P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service
* If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, 
and Place of Purchase.

No Service Parts Available for this Product

TEN YEAR  LIMITED WARRANTY

This is a “Limited Warranty” which gives you specifi c legal rights. You may also have other rights which vary from state to state or province to province.
For a period of ten years from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge 
to you.

Not Covered -

 Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs, batteries, and other expendable items are 

not covered by this warranty. Unauthorized service or modifi cation of the product or of any furnished component will void this warranty in its entirety. This 
warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges.
This warranty covers only HeathCo LLC assembled products and is not extended to other equipment and components that a customer uses in conjunc-
tion with our products.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, REPRESENTATION 
OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PURPOSE OR USE, AND SPECIFICALLY 
IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON THE PART OF HEATHCO 
LLC FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS 
OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states or provinces do not allow the exclusion or limitation of incidental or consequential 
damages, so the above limitation or exclusion may not apply to you. Please keep your dated sales receipt, it is required for all warranty requests.

Summary of Contents for Replacement Motion Sensor SH-5407









Reviews: