2
598-1136-04
AM
PM
A
A
B
ON
OFF
ON
OFF
DIM
GROUP
MODE
ALL
ON
ALL
OFF
PANIC
DIM
ON
OFF
ON
OFF
DIM
DIM
ON
OFF
ON
OFF
DIM
DIM
ON
OFF
ON
OFF
DIM
DIM
–
Select
Time Set Program
+
1
2
Product Identification
Clock
Light Control - ON, OFF, DIM* with
indicator light.
Light Program Modes - Select Mode
1, 2, 1 & 2, or OFF (lights will indicate
which mode(s) are selected.
ALL ON - Turns all lights within a
Group ON. Select either Group A
or B then press ALL ON.
Control Group - Select Group A or B
lighting controls.
PANIC* - All lights within a Group will flash
ON and OFF. Select either Group A or B
then press PANIC.
TIME SET - Set the time and select
between 12-hour or 24-hour mode.
SELECT, (-, +) - Set hours and
minutes for clock and ON/OFF
program setup.
AM, PM, 24 Hour
Clock Set - Lights
indicate AM or PM
setting. No light
indicates 24 Hour
setting.
ALL OFF - Turns all lights within a
Group OFF. Select either Group A or
B then press ALL OFF.
Control Group Indicator- Light on is
Group A, light off is Group B (
Note:
also flashes upon Program entry).
PROGRAM - Program ON/OFF times
for light controls (light is on when in
program mode).
Control Identification -
Remove clear plastic film
by placing two fingers on
the plastic and “pinching”
the plastic. Remove card.
Use the decals (included)
or write on the card to la-
bel each control. Replace
card and plastic film.
*DIM Control: Dims lighting controls that are equipped with the dimming feature.
Pressing DIM will toggle through the different dim levels. Each time the DIM
button is pressed, the control LED will momentarily light.
The receiver saves the last dim setting used. To recall the last dim setting, press
the DIM control once.
Note:
Not all lighting controls have the DIM and PANIC (flash) feature.
