7
ELBOWS:
Saf-T Liner fixed Elbows are available in 15°, 30°, 45° and 90°. An Adjustable 90° Elbow
is also available.
Elbows allow a change in direction in the system, can be used when an
offset is needed or to connect to an insert. See Fig. 11.
TEES:
A variely of Tees are available to suit most installations such as: Appliance
Tee, Cleanout Tee, Fixed Tee, Crimped Tee and Tee Caps and Tee Plugs.
See Fig. 12
INCREASERS AND REDUCERS:
Saf-T Liner Increasers and Reducers are designed to increase or
reduce the size of a Saf-T Liner system to accommodate a range
of flue sizes, appliances and installations. NOTE: Increasing or
decreasing a chimney size can
have
a negative impact of chimney
performance and safety. Use these components only when
appropriate. See Fig. 13
RAIN CAP:
Saf-T Liner Rain Cap is made of stainless steel and required to cap the liner system
against precipitation and creates a venturi effect to enhan
ce draft. Secure i
n positon
with stainless steel screws providing easy removal for inspection and cleaning. See
Fig. 14.
FIG.11
FIG.12
FIG.13
FIG.14
TOP CLAMP:
Saf-T Liner can also be supported from the top of the masonry chimney by using a
Top Clamp. See Fig. 15.
FIG.15
TOP PLATE:
Saf-T Liner Top Plates are available in different dimensions such
as 13” x 13”, 13” x 18” and 18” x 18”. A Top Plate is used to
seal off the liner system at the top of the masonry chimney and
to support the liner in conjunction with the Storm collar. See
Fig. 16.
FIG.16
Topview
and
Frontview
