1
Model Saf-T Liner
Installation and Maintenance Instructions
Stainless Steel Chimney Liner
For Installation into an existing Masonry Chimney.
Saf-T Liner is designed for an installation by a qualified
person in accordance with local building codes.
4”, 5”, 6”, 7” and 8” diameters - 9”, 10”, 12” and 14”
available upon request.
IMPORTANT: A major cause of vent related fires is failure to
maintain required clearances (air spaces) to combustible
materials. It is of the utmost importance this Saf-T Liner be
installed only in accordance with these instructions.
Do not install this product until you have read and fully
understand these installation instructions.
Saf-T Liner has been tested and listed using all the supports,
sections, etc., described herein. Deletion or modification of any
of the required parts or materials may seriously impair the safety
of your installation, and void the conditions of certification and
or the manufacturers warranty.
Keep these instructions in a safe place for future reference.
•
Stainless Steel 304 or 316
•
Continuous Laser Welded Seams
•
Straight Male and Female Ends
•
Tested & Listed to UL 1777
5030 Corporate Exchange Blvd
Grand Rapids, MI 49512
Call 800-433-6341
www.heatfab.com
Failure to follow the installation instructions
could cause FIRE, CARBON MONOXIDE
POISONING, OR DEATH. If you are unsure of
installation requirements, call the phone
number listed on the instructions,
1.800.433.6341 or visit
www.selkirkcorp.com
.
! WARNING
LISTED
