4
Removal of Front Grill and Top Cover
To remove the front grill, remove 120vac power from insert, locate the 4 mounting screws, 2 on each side.
Remove screws and pull front grill out towards the front. Refer to Figure 1
.
Figure 1, removal of front grill
To remove the top cover, locate the 9 mounting screws, 2 on each side and 5 in the back of the insert.
Remove the screws and pull forward while at the same time lifting out. Be careful to not damage the 2
cables running to the main control board. Remove both cables from their respective sockets and remove
top. When laying the top down to service the insert, insolate the touchpad and temperature pot being
careful not to short out to the insert case ground. Refer to Figure 2.
Figure 2, removal of top cover
Front grill assembly
4 mounting screws, 2 on each side
2 cables,
touch pad
and pot
5 mounting screws located in rear
4 mounting screws, 2 on each side
