10
Connecting the LPG Gas Cylinder
Connecting the LPG Gas Cylinder
Before assembly, make sure all packing material has been removed. A flexible gas
rubber hose (EN 1763-1) and clamps are supplied with this appliance and must be used .
You need to acquire an LPG, propane gas cylinder, usually marketed as patio gas. We
recommend a 5kg cylinder for this product to be housed inside, or a larger bottle can be
used externally . An external bottle must be placed 1 .8m from the heater . Replacement
must be made as per the instructions specified in the “Replace the gas cylinder” section
of this instruction manual. Be careful not to kink the flexible gas rubber hose.
Make sure the appliance gas knob is turned “OFF” (full disk) before assembling.
1 . Put the LPG tank inside the tank housing .
2 . The cylinder must be kept at least 5 feet away from the fire pit during use.
3 . Connect the regulator to LPG cylinder by hand by attaching to the top of the bottle
and securing in place using the black lever on the regulator .
4 . Connect the hose to the appliance and the regulator . Tighten the screw of the hose
clamp with a screwdriver .