51
Heat & Glo • TRUE-36, TRUE-42, TRUE-50 Installation Manual • 2282-980 Rev. F • 8/14
G. Install the Log Assembly
Log Set Assembly: LOGS-TRUE36
LOGS-TRUE42
Models: TRUE-36C, TRUE-36H, TRUE-36S
TRUE-42C, TRUE-42H, TRUE-42S
CAUTION:
Logs are fragile, handle with care.
Log #1 (2280-701 for TRUE-36, 2281-701 FOR TRUE-42)
: Locate log
placement notch on the bottom of log #1. See Figure 2. Mate outer notches on the bottom of Log #1 with the left and right grate
tines. Slide Log #1 toward the rear of appliance until back side of Log #1 contacts the log placement tabs. See Figures 1-3.
Figure 3.
Log #2 (2280-702 for TRUE-36, 2281-702 for TRUE-42)
: Locate log placement notch on the bottom of Log #2. See Figure
4. Mate notch on the bottom of Log #2 with the center and right grate tines. Slide log toward rear of appliance until right
end contacts the side grate tine. See Figure 5.
LOG PLACEMENT TABS
LOG PLACEMENT TABS
Figure 1.
Figure 2.
LOG PLACEMENT NOTCH
LOG PLACEMENT NOTCH
Figure 4.
Figure 5.
LOG PLACEMENT SLOTS
LOG PLACEMENT SLOTS
11
22
11
11
22
FLAT SPOT FOR LOG #3
FLAT SPOT FOR LOG #3
NOTCH FOR LOG #6
NOTCH FOR LOG #6
BURNED AREA
BURNED AREA
33
22
LOG PLACEMENT NOTCH
LOG PLACEMENT NOTCH
LEFT SIDE TOWARD REAR
LOG CONTACTS
LOG CONTACTS
SIDE GRATE TINE
SIDE GRATE TINE
NOTCH FOR
NOTCH FOR
LOG #3
LOG #3
Log #2 (TRUE-36 ):
Log #2 will be about 1 inch from the
back of the center grate tine when properly placed. See
Figure 5.
Log #2 (TRUE-42 ):
Log #2 will contact center log placement
tab on center grate tine. See Figure 5.
TRUE-42 ONLY
TRUE-42 ONLY
Note: Refer to Section J for air shutter adjustment instructions.
