Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. V • 3/13
22
Figure 21.
Remove the insulation from the outer flue
pipe.
Figure 22.
To attach the first section of flue pipe, make sure
to use the fiberglass gasket to seal between the first flue
pipe component and the outer fireplace wrap. Use 2 self
tapping screws to secure the gasket to the outer wrap.
Figure 23.
Remove the insulation from the outer flue
pipe.
2 SCREwS
Figure 24.
Cut the metal retaining band and fold the
sides out.
Figure 25.
Fold the center parts of the retaining band out
and us to remove the flue cap.
Figure 26.
Discard the flue cap, remove and discard the
insulation basket. Note: Once the flue cap has been re-
moved it CANNOT be reattached.
Figure 27.
Attach the first flue section (it will snap into
place). Slide the insulation gasket onto the flue section,
up against the appliance and over the tabs. Use two self-
tapping screws to secure gasket to outer wrap.
Rear Flue
Note:
Once the flue cap has been removed, it cannot
be reattached.
