Heat & Glo • Passage • 700-900 Rev. M • 12/07
23
Step 4. Positioning, Leveling, and
Securing the Appliance
!
!
The diagram below shows how to properly position, level,
and secure the appliance.
Figure 21. Proper Positioning, Leveling, and
Securing of a Appliance
Figure 22. Intermittent Pilot Ignition
Step 5. The Gas Control Systems
WARNING: THIS UNIT IS NOT FOR USE WITH
SOLID FUEL.
Intermittent Pilot Ignition (IPI) System
The gas control system used with this model is
Intermittent
Pilot Ignition (IPI).
This system includes a 3V control valve,
electronic module, and intermittent pilot.
WARNING: CONTINUOUS 110-120 VAC SER-
VICE MUST BE WIRED TO THE APPLIANCE
JUNCTION BOX.
1. Place the appliance into position.
2. Level the appliance from side to side and from front to
back.
3. Shim the appliance with non-combustible material, such
as sheet metal, as necessary.
4. Secure the appliance to the framing using nails or screws
through the nailing tabs. The nailing tabs are located in
the manual bag. Holes are provided in the base-pan (in-
side the hearth) for securing to the floor.
NAILING TAB
HOLES
FLAME
SENSOR
ROD
