35
Heat & Glo • Grand-I35-C, Grand-I35-SP, Supreme-I30-C, Supreme-I30-SP • 2206-901 Rev. P • 6/14
Log #3 (SRV2205-705)
: Position the log groove with the 2nd grate tine from the right. Rotate the right end of the log
clockwise until the end of the log contacts the grate bar.
Figure 7. Log #3
Figure 8. Log #3
Figure 9. Place Log #4
Figure 10. Place Log #5
FLAT SPOT
FLAT SPOT
FOR LOG #7
FOR LOG #7
LOG GROOVE
LOG GROOVE
CONTACTS
CONTACTS
GRATE TINE
GRATE TINE
LOG CONTACTS
LOG CONTACTS
GRATE BAR
GRATE BAR
LOG GROOVE
LOG GROOVE
FLAT SPOT FOR
FLAT SPOT FOR
GRATE BAR
GRATE BAR
FLAT SPOT FOR
FLAT SPOT FOR
LOG #6
LOG #6
LOG GROOVE
LOG GROOVE
CONTACTS
CONTACTS
GRATE TINE
GRATE TINE
END OF LOG RESTS
END OF LOG RESTS
ON FLAT SPOT
ON FLAT SPOT
LOG RESTS ON
LOG RESTS ON
FLAT SPOT
FLAT SPOT
LOG NOTCH
LOG NOTCH
CONTACTS
CONTACTS
GRATE TINE
GRATE TINE
3
4
5
Figure 5. Log #2
Figure 6. Log #2
Log #2 (SRV2205-701)
: Position Log #2 as shown in Figure 5. Mate the right grate tine with the log groove. Rest the back
of the log on the log support. Rotate the back of the log clockwise until the foot contacts the vertical wall of the log support.
FLAT SPOT FOR LOG #4 AND LOG #7
FLAT SPOT FOR LOG #4 AND LOG #7
LOG FOOT
LOG FOOT
CONTACTS
CONTACTS
LOG SUPPORT
LOG SUPPORT
LOG FOOT
LOG FOOT
SURFACE
SURFACE
CONTACTS
CONTACTS
LOG SUPPORT
LOG SUPPORT
2
MATE TINE WITH
MATE TINE WITH
LOG GROOVE
LOG GROOVE
Log #4 (SRV2205-704):
Position Log #4 so that the log groove contacts the second grate tine from the left, as shown in
Figure 9. Set the other end of the log on the
fl
at spot located on Log #2. See Figure 5.
Log #5 (SRV2205-710):
Mate the notch on Log #5 with the second grate tine from the left as shown in Figure 10. Set the
other end of the log on the
fl
at spot of Log #1. See Figure 3.
