56
You have 3 options for door trim, see Fig. C.
x2 or x4
19/32" x 2-1/2" x 26-5/8" (1,5 x 6,3 x 67,6 cm)
AH
x2
19/32" x 2-1/2" x 55-1/8" (1,5 x 6,3 x 141,9 cm)
FDA
Fig. D
(11) Special Coating Screws
FINISH
You have fi nished attaching your door trim and threshold.
DOOR TRIM
PARTS REQUIRED:
3/4" (1,9 cm)
x54
or 60
Fig. B
9"
(22,9 cm)
CENTER
CENTER
1
3
2
Position and square upper horizontal door rail
AH
at top of
FDA.
Secure
with 3/4" screws from inside of doors.
Position
FDA
centered and square with bottom door trim.
Secure
with 3/4" screws from inside of doors
(Fig. B)
.
Secure hinge boards from inside using 3/4" screws
(Fig. A)
.
5
Center metal threshold between doors and secure with
(11) 3/4" special coating screws into fl oor
(Fig. D)
.
6
Center trim
OWB
over doors and secure using (5) 2" nails into framing.
4
Reinforce the door trim with 3/4" screws through door panel into trim
(Fig. A)
. Locate screws as shown
(Fig. B)
.
BEGIN
x5
2" (5,1 cm)
CENTER
2" (5,1)
Finish Nails
AH
AH
FDA
FDA
OWB
Nail into framing.
3/4" (1,9 cm)
Screws from behind.
Door
Trim
Hinge
Board
Fig. A
Door
Panel
3/4" (1,9 cm)
Screws
Flush
Flush
x1
64" Metal Threshold
3/4" (1,9 cm)
x11
Bagged separately / special coating
Trim Option 2
Trim Option 1
Customize your door trim; use 1 of 3 options:
Assembly for Option 1 is shown in main image.
If you choose Option 2, cut FDA to 43-5/8" (118,4 cm).
Install AH at 9" down from door upper trim.
Follow steps 1-4. Add more screws as needed.
Trim Option 3
9" (22,9 cm)
x1
19/32" x 2" x 72" (1,5 x 5,1 x 182,9 cm)
OWB
AH
Fig. C
Optional AH
43-5/8"
(118,4 cm)
9"
(22,9 cm)
Cut FDA for
Trim Option 2
