32
PARTS REQUIRED:
SIDE WALL PANELS
x16
2" (5,1 cm)
x40
1-1/2" (3,8 cm)
1-1/2" (3,2 cm)
Nails
1-1/2" (3,2 cm)
Nails
1-1/2" (3,2 cm)
Nails
2" (5,1 cm)
Nail
2" (5,1 cm)
Nails
Fig. G
Remove temporary support
OO
.
Place
48" x 84"
panel on side wall flush with bottom of installed
42" x 96"
panel.
Secure panel with (1) 2" nail in bottom corner
(Fig. C)
. Ensure the measurement between the panel edges are
the same along the corner
(Fig. F)
.
Secure panel with (1) 1-1/2" nail in upper corner.
4
2" Nail
Flush
Panels Flush
at bottom
5
Secure lower edge of panels to floor with 2" nails spaced 6" apart. Angle nails to hit floor frame
(Fig. G)
.
Secure side wall panels to rafter and wall studs with 1-1/2" nails spaced 6" apart as shown.
Repeat STEPS 1 - 5 to install the opposite side panels.
OO
Fig. E
48"
(121,9 cm)
Fig. C
Fig. F
Same
Measurement
1-1/2" Nails
2"
(5,1 cm)
Nail
6"
(15,2 cm)
6"
(15,2 cm)
6"
(15,2 cm)
