12
Move to the opposite side. Using the long edge of the panel as a lever, move the panel side-to-side until the
corner is flush to the floor frame
(Fig. B)
. Use the gauge block to ensure 3/4" on the joist.
Secure panel with (2) 2" nails in the corners.
2
BEGIN
1
3
4
Secure the panel with 2" nails spaced 6" apart on edges and 12" apart inside panel.
Use a chalk line or use pre-painted grid lines to nail into joists.
Ensure your floor frame is square by installing one panel and squaring frame.
Ensure that the floor frame is square by measuring diagonally across the frame corners. If the measurements are
the same your floor frame is square. The measurement will be approximately
203-5/8" (517,2 cm).
PARTS REQUIRED:
x1
5/8 x 48 x 96"
(1,6 x 121,9 x 243,8 cm)
x53
2" (5,1 cm)
FLOOR PANELS
Place first
48" x 96"
panel with the rough side up (painted-grid lines side) with the 48" edge and corner
flush to the floor frame
(Fig A)
. Secure panel with (2) 2" nails in the corners.
Flush
(2)
Nails
Grid lines up
6"
(15,2 cm)
(2)
Nails
Flush
3/4"
(1,9 cm)
12"
(30,5 cm)
3/4" GAUGE
BLOCK
GAA
3/4" GAUGE
BLOCK
Flush
Flush
Fig. A
Fig. B
96"
(243,8 cm)
48" x 96"
(122 x 243,8 cm)
