Section 5-3
25
MLSM010601
Procedure P
- Stove Top Prop Up
Step 1: Disconnect power supply to
range. Pull range away from wall
and remove backguard held by 3
screws and washers.
Step 2: Remove all burner compo-
nents to avoid sliding backwards
when stove top is hinged up.
Step 3: Pull stove top upwards by
holding the front of the stove top
with two hands. Depending on
nature of call, you may wish to
remove the control panel first - see
Procedure k (steps 6 & 7).
Note: A sturdy tap may be needed
to dislodge the pems holding the top
to the stove’s side panels.
Step 4: Using support bar, swing up
and attach to manifold.
Note: It is very important that the
support bar’s groved end is securely
snug with the manifold and npinched
with any of the aluminum gas
tubing.
PUSH UP
When finished ensure probe sits
inside clip
