Hearthstone Quality Home Heating Products, Inc
® Castleton Model 8030 AU
6
Installation
U
NPACKING
Hearthstone packages your Castleton woodstove
with the greatest care so that it ships safely. Under
certain circumstances, however, damage may occur
during transit and handling. When you receive the
Castleton, carefully unpack and inspect the stove
and all accompanying parts. Ensure that all parts are
included in the ash pan. If any parts are damaged or
missing, please contact your authorized Hearthstone
dealer immediately.
P
ACK
L
IST
Castleton Model 8030 AU Woodstove
Owner’s Manual
The label is attached by a cable to the bottom of the
stove. Take care when lifting the stove not to
damage the label or cable. After final positioning of
the stove, the label may be stored between the
bottom of the stove and the bottom heat shield.
I
NSTALLING
Y
OUR
S
TOVE
Choose a place to install your Castleton woodstove.
Inspect this location to make sure that the stove and
stovepipes will have the required clearance from
combustible materials that are near the stove.
Combustibles include walls, floor, ceiling, and
chimney chase. You must carefully consider the
clearances to all of these combustibles before
actually connecting your stove.
If the floor is made of combustible material, then a
non-combustible floor protector is required between
the floor and the stove. An example of a non-
combustible floor protector is a hearth constructed
with a continuous layer of tile, brick, slate, glass or
another non-combustible facing.
The floor
protector must have a minimum R-value of .1m
2
K/W
The venting diagrams in this manual are for
reference only. Venting installations must meet the
requirements of the BCA (NCC) and the AS2918
