11
Hearth & Home Technologies • PHSI-MCE
Instructions • 2560-973 • 6/20
Please contact your Hearth & Home Technologies
dealer with any questions or concerns.
For the location of your nearest Hearth & Home Technologies
dealer,
please visit www.hearthnhome.com.
Hearth & Home Technologies
7571 215th Street West, Lakeville, MN 55044
www.hearthnhome.com
Figure 6.3 Bend Register Cover Tabs
2. Bend over both register cover tabs. See Figure 6.3.
Note:
It is permissible to paint the outer wrapping of the
flex vent with black paint, if desired. See Figure 6.4.
Figure 6.4 Paint Outer Wrapping of Flex Vent (Optional)
TABS
LOUVERS FACING THE FRONT OF THE APPLIANCE
(CONTROL SIDE)
Figure 6.5 Correct Register Orientation
WARNING! Risk of Fire!
DO NOT block passive heat
registers! Overheating of appliance and combustible
materials will occur.
3. Install register cover with louvers facing the front of the
fireplace (control side) using provided screws. See
Figure 6.5.
Painting
If desired finishing includes a painted register cover,
Hearth & Home Technologies recommends using high
temperature paint with a minimum of 300 °F continuous
exposure rating.