10
Hearth & Home Technologies • PHSI-MCE Instructions • 2560-973 • 6/20
6. Finishing Instructions - Side Discharge
1. Apply wall sheathing material, such as drywall, up
to 1/2 inch thick up to the edge of the installed side
discharge assembly. See Figure 6.1 and Figure 6.2.
Figure 6.2 Finishing Edge
Figure 6.1 Wall Sheathing Installed
WARNING! Risk of Overheating! DO NOT
apply wall
sheathing past outside edge of plenum. Overheating of
appliance and combustible materials will occur.
Figure 5.16 Install Flex Venting to Side Discharge Assembly
Figure 5.17 Flex Venting Installed
