1. Remove the yellow colored tab from the
flat, (+) positive side of the size 10 battery.
Wait one minute for battery to reach full
power before using
(or testing)
battery.
2. Open battery holder gently, using your
fingernail or thumbnail. Pull out on the
small lip of the battery holder located on
the lower part of the Apollo-6200 / 6210.
3. Place the battery in the battery holder –
NOT directly inside the Apollo
. Fit the
battery in the holder with the flat, positive
(+) side facing up.
4. Close the battery holder.
NEVER force the
battery holder closed.
If the holder does
not close easily then the battery is probably
upside down.
1
2
How to insert the battery
4
LOW BATTERY INDICATOR:
When the battery is no longer strong enough
to power your Apollo, you will hear 2 beeps then a pause then 2 beeps again.
This will repeat until you replace the battery.
How to insert the battery
3
