Listening Settings
11
Press and hold the multi-function button for about 2 seconds. You will hear
one, two or three beeps. The number of beeps refers to the setting.
Setting 1:
Normal setting – 1 beep. Use in most listening situations.
Setting 2:
Noise setting – 2 beeps. Reduces the amount of low frequency
amplification. Often helpful in noisy situations.
Setting 3:
Whistle reduction – 3 beeps. Use if your Apollo whistles or if
sounds seem too sharp or tinny.
Setting 4:
Apollo-6210 ONLY
Telephone setting – 4 beeps.
Use when talking on the telephone or with a loop system. Hold the telephone
receiver near the hearing aid a little above your ear. You will only hear sounds
from the telephone or loop system.
You have a "smart" Apollo-6200 or Apollo-6210 – Each time you turn your
Apollo on, it will be on the volume level and listening setting you were using
before you turned it off.
Apollo-6200 – Talking on the telephone:
You can hear both the telephone
conversation and what's going on around you with any of the settings on the
Apollo-6200. Most prefer setting 3 (Whistle reduction). It will probably sound
the best and reduce feedback. It may be necessary to hold the telephone at a
slight angle to avoid feedback.
Apollo-6200 has
3 listening settings.
Choosing your Listening Settings
Apollo-6210 has
4 listening settings.
