10
V. Installation Instructions
5.11 Remove the Access Cover, which is secured by two magnets, from the
bottom of the unit. There are two (2) Outlet Ports on the unit, with one on
each side of the Housing. Generally, one shall be blanked-off and the other
used for connection with a duct to the HealthyAir
®
Air Purification System.
Install the Blank-Off Plate on one side and the Outlet Flange on the other
side, by passing them thru the opening at the bottom of the Housing, as
shown in Fig. 11.1, and mounting them on the (4) Stud Screws, respectively.
Using the Hex Nuts, tighten and secure the Outlet Flange and the Blank-Off
Plate. Finally, reinstall the Access Cover.
Note that, there are four types of Outlet Flanges available; a Single
Circular Outlet Flange, Dual Circular Outlet Flange Oval Outlet Flange,
and Rectangular Outlet Flange, as shown in Fig. 11.2.
Fig. 11.1 – Installation of Blank-Off Plate and Outlet Flange
11
V. Installation Instructions
Fig. 11.2– Outlet Flange Options
5.12 Duct the outlet of the Source Capture
®
Vent to the inlet of the HealthyAir
®
Air Purification System, as shown in Fig. 12.
Note that, the duct geometry and size will naturally vary depending on the
type of Outlet Flange utilized and the required length of the duct.
Fig. 12 – Duct Connection to HealthyAir
®
Unit
