4
IV. Component Reference
1. Inlet Vent
2. Light Switch
3. Pop-Up Knob
4. LED Light
5. Outlet Port
6. Power Socket
7. Access Cover
8. Mounting Bracket
9. Housing
5
V. Installation Instructions
5.1 To mount the Source Capture
®
Vent, cut an opening in table-top or preferred
mounting surface. The dimensions of the cut-out are 8-3/8” x 4-7/8”, as
shown in Fig. 1
Fig. 1 - Cut-Out Dimensions
5.2 To flush-mount the vent, such that the top of the unit is flush with the table top
or surface, produce a 3/16” rebate around the perimeter of the cut-out, as
shown in Fig. 2.
Fig. 2 – Rebate for Flush-Mount
