6
V. Installation Instructions
5.3 Unscrew the two (2) Thumb Screws to remove the two (2) Mounting Brackets
from the unit, as shown in Fig. 3.
Fig. 3 – Remove Mounting Brackets
5.4
Remove the Access Cover from bottom of the Source Capture
®
Vent, as
shown in Fig. 4.
Fig. 4 – Remove Access Cover
7
V. Installation Instructions
5.5 Install the Source Capture
®
Vent in the table by inserting it into the cut-out, as
shown in Fig. 5.
Fig. 5
– Install Source Capture
®
Vent
5.6 Reattach the two (2) Mounting Brackets to the unit by screwing in the two (2)
Thumb Screws, as shown in Fig. 6.
Fig. 6
– Reattach Mounting Brackets
