8
Dimensions - Unit - Inches (MM)
HRV5-150 HEAT RECOVERY VENTILATORS
18-3/4 (476)
NOTE - Front clearance of
25 in. (635 mm)
is recommended
for servicing unit
14-3/4 (375)
HRV3-195 HEAT RECOVERY VENTILATORS
14-3/4 (375)
NOTE - Front clearance of
25 in. (635 mm)
is recommended for
servicing unit
NOTE: DRAWING DEPICTS HRV3-300; MODEL
HRV3-195 MOTOR IS AT TOP BLOWER
DEFROST
DAMPER
DEFROST AIR
FROM INSIDE
FILTER
CONDENSATE DRAINS
FRESH
AIR TO
INSIDE
STALE AIR
FROM
INSIDE
BLOWER
FRESH
AIR FROM
OUT SIDE
MOTOR (SEE
NOTE BELOW)
CORE
FILTER
CORE
STALE
AIR TO
OUTSIDE
49 (1245)
BLOWER
Blower Duct
Connections
7 in. (178 mm)
Duct
Connections
6 in. (152 mm)
RECIRCULATING
DEFROST
DAMPER
FILTERS
STALE AIR FROM INSIDE
CONDENSATE
DRAINS
BALANCING
DAMPER
FRESH
AIR TO
INSIDE
STALE
AIR TO
OUTSIDE
NOTE - All Duct Connections
6 in. (152 mm)
FRESH AIR FROM OUTSIDE
MOTOR
BALANCING DAMPER
33-5/8 (854)
BLOWER
BLOWER
CORE
HRV3-150-TPD and ERV5-150-TPD
FRESH AIR
FROM
OUTSIDE
STALE
AIR FROM
INSIDE
FRESH
AIR TO
INSIDE
STALE
AIR TO
OUTSIDE
DEFROST
DAMPER
(TPD Model Only)
BLOWER
BLOWER
NOTE − Front clearance of
25 inches (635 mm) is
recommended for servicing unit
14
(356)
17-1/4
(438)
All duct connections are
oval
collars
for use with 5 in. (125 mm) ductwork.
Balancing Dampers are located on all collars.
22-3/4
18-3/4 (476)
Figure 1. ERV5-150-TPD, HRV3-150-TPD, HRV3-195 AND HRV5-150
Summary of Contents for ERV5-130
Page 36: ...36 Figure 43 Wiring Diagram HRV5 270 TPD ECM...
Page 60: ...60...