10
STEP 10
Attach the SEAT (70) to the SEAT POST(4) with NYLOCK NUTS(M8x1.25)(92) and
WASHERS(M8)(96). Insert the SEAT POST (4) into the MAIN FRAME (1) and secure with the
ADJUSTMENT KNOB (72).
Proper seat height is important for efficient exercise. To determine proper seat height, sit on the
Fan bike and center the ball of your foot on the pedal in the down position.
If your leg is too straight or if your foot cannot touch the pedal when extended at the down stroke,
you will need to lower the seat. If your leg is bent too much, you will need to raise the seat. Loosen
and pull the ADJUSTMENT KNOB (72), then lower or raise the SEAT(70) to the desired height,
and secure with the ADJUSTMENT KNOB (72). Make all adjustments to seat height while off of the
bike.
NOTE:
The pin of the ADJUSTMENT KNOB (72) must be inserted into one of the adjustment holes
in the SEAT POST (4) and the ADJUSTMENT KNOB (72) must be screwed in tight to ensure that
the SEAT POST (4) will fit securely in the MAIN FRAME (1).
STEP 11
Install two AA batteries into the METER (37), the batteries are not included. See page 15 for
detailed battery installation instructions. Plug the CONNECTION WIRE (38) into the METER (37),
and push the excess wires
back into the METER POST (5). Slide the METER (37) onto the plate on the METER POST (5). Be
careful not to damage the wires when attaching the METER (37).
Summary of Contents for FAN BIKE
Page 5: ...4 HARDWARE PACKING LIST y...
Page 15: ...14 EXPLODED DIAGRAM...